Code: QX125634

EvapoClean - 3 x 125ml + 5 x 25ml

Previous QMX Code: EV-3.125+5.25-2V

EvapoClean is designed to purify acids, reagents or samples for trace and ultra trace analysis.provides the safe and economical purification or concentration of simple aqueous solutions to aggressive acids/reagents.

  • Sub-boiling acid/reagent purification in a closed environment
  • Simultaneous purification/concentration and digestion in closed or open environment in a single system
  • Corrosion resistant inert graphite heating block with thick PFA coating

3 x 125ml and 5 x 25ml closed positions and 14 (as 4 x 90ml and 10 x 30ml) open positions
Requires a separate controller for operation and 3 x 125ml and 5 x 25ml vessel kits for closed distillation

Unit Size: 1

The EvapoClean is a unique system that combines "Evaporation - Concentration - Purification" of samples in either an enclosed or open environment in a single device.

The patented, closed design of EvapoClean protects your work environment. The hermetic structure not only excludes any risk of atmospheric contamination of samples but also prevents cross contamination. It can be programmed to operate at a constant, uniform temperature and can purify as little as 25ml of reagent. Using closed distillation elbows this model allows for the simultaneous handling of up to 3 solutions/reagents up to 125ml each and 5 solutions/reagents up to 25ml each. Whilst the open sample wells allow for the evaporation or digestion of up to 14 samples (4 x 90ml and 10 x 30ml) in the same device.

EvapoClean utilises a corrosion resistant inert graphite heating block with thick PFA coating and is designed for the handling of a wide variety of samples ranging from simple aqueous solutions to the most aggressive reagents such as HNO3, HF, HCl, HBr, HClO4, NH4OH and H2O2.

This model allows for the simultaneous handling/purification of up to 3 acids up to 125ml each and 5 acids up to 25ml each using 8 PTFE distillation elbows and 16 PFA bottles for closed distillation. The PTFE distillation elbows and PFA bottles are not included with the EvapoClean device and are sold separately. The EvapoClean - 3 x 125ml + 5 x 25ml model requires 3 of the 125ml and 5 of the 25ml Vessel Kits for closed distillation.

Note: A separate controller is required to operate EvapoClean and this is available in 2 configurations.

Other EvapoClean devices are available for the purification of other volumes of acid.

Please contact us for advice on choosing the right product for your application.

Model
  • EvapoClean
Product Type
  • System
Volume
  • 25ml+125ml
Sample Capacity
  • 5+3
Related Products