1. Home /
  2. Chemicals /
  3. Inorganic Standards /
  4. Multi-Element ICP/ICP-MS

Multi-Element ICP/ICP-MS

A comprehensive range of certified multi-element standards for ICP/ICP-MS including a wide range of calibration and quality control standards, instrument set-up and tuning solutions, calibration and QC standards for EPA methods along with USP compliance standards.
All reference standards are produced and certified as appropriate to a laboratory quality management system that is accredited to ISO 17025 and ISO 17034.
Additionally, we will be pleased to prepare any specific concentration or combination of elements as a custom mix to meet your individual instrument setup, calibration and quality control requirements.

Alphabetical Alphabetical Reversed Latest Popularity
Agilent ICP-MS Tuning Solution (SCP5MS)

Agilent ICP-MS Tuning Solution (SCP5MS)

Code: QX103599
Agilent ICP-MS Tuning solution Ce, Co, Li, Tl, Y each at 10µg/l in 2% HNO3
WaveCal 2 Standard for PE

WaveCal 2 Standard for PE

Code: QX103564
Wavecal Standard II for PE 6000, 6500(XR) 20ppm: Be,La,Mn,Ni,Sc,Zn 50ppm: Ba Matrix: 2% HNO3
Lab Perf. Check Solution D

Lab Perf. Check Solution D

Code: QX103742
200ppm Sn in 20% HCl
Lab Perf. Check Solution D

Lab Perf. Check Solution D

Code: QX103741
200ppm Sn in 20% HCl
Lab Perf. Check Solution C

Lab Perf. Check Solution C

Code: QX103739
1000ppm P, Si; 200ppm Pb, Sb, Se, Sr, Tl, V, Zn in 5% HNO3
Lab Perf. Check Solution B

Lab Perf. Check Solution B

Code: QX103738
1000ppm K; 200ppm Cu, Fe, Hg, Li, Mg, Mn, Mo, Na, Ni in 5% HNO3
Quality Control Standard 4 (QC 26)

Quality Control Standard 4 (QC 26)

Code: QX103333
Element Concentration μg/ml Al 100 Sb 100 As 100 B 100 Ba 100 Be 100 Ca 100 Cd 100 Co 100 Cr 100 Cu 100 Fe 100 K 1000 Mg 100 Mn 100 M...
Quality Control Standard 4 (QC 26)

Quality Control Standard 4 (QC 26)

Code: QX103331
Element Concentration μg/ml Al 100 Sb 100 As 100 B 100 Ba 100 Be 100 Ca 100 Cd 100 Co 100 Cr 100 Cu 100 Fe 100 K 1000 Mg 100 Mn 100 M...
Quality Control Standard 4 (QC 26)

Quality Control Standard 4 (QC 26)

Code: QX103330
Interference Std. 5 (125ml)

Interference Std. 5 (125ml)

Code: QX103371
Na (5000ppm) in 4% HNO3
Trace Metals I, 125ml

Trace Metals I, 125ml

Code: QX103383
Interference Std. Set (500 ML)

Interference Std. Set (500 ML)

Code: QX103376
Interference Std. Set (100ml) Includes one each of the following 140-104-011, 140-051-511, 140-104-031, 140-104-041, 140-104-051