Code: QX125633

EvapoClean - 12 x 25ml

Previous QMX Code: EV-12.25ML-2V

EvapoClean is designed to purify acids, reagents or samples for trace and ultra trace analysis.provides the safe and economical purification or concentration of simple aqueous solutions to aggressive acids/reagents.

  • Sub-boiling acid/reagent purification in a closed environment
  • Simultaneous purification/concentration and digestion in closed or open environment in a single system
  • Corrosion resistant inert graphite heating block with thick PFA coating

12 x 25ml closed and 24 x 30ml open positions
Requires a separate controller for operation and 12 x 25ml vessel kits for closed distillation

Unit Size: 1

The EvapoClean is a unique system that combines "Evaporation - Concentration - Purification" of samples in either an enclosed or open environment in a single device.

The patented, closed design of EvapoClean protects your work environment. The hermetic structure not only excludes any risk of atmospheric contamination of samples but also prevents cross contamination. It can be programmed to operate at a constant, uniform temperature and can purify as little as 25ml of reagent. Using closed distillation elbows this model allows for the simultaneous handling of up to 12 solutions/reagents up to 25ml each. Whilst the open sample wells allow for the evaporation or digestion of up to 24 samples (30ml each) in the same device.

EvapoClean utilises a corrosion resistant inert graphite heating block with thick PFA coating and is designed for the handling of a wide variety of samples ranging from simple aqueous solutions to the most aggressive reagents such as HNO3, HF, HCl, HBr, HClO4, NH4OH and H2O2.

This model allows for the simultaneous handling/purification of up to 12 acids up to 25ml each using 12 PTFE distillation elbows and 24 PFA bottles for closed distillation. The PTFE distillation elbows and PFA bottles are not included with the EvapoClean device and are sold separately. The EvapoClean - 12 x 25ml model requires 12 of the 25ml Vessel Kits for closed distillation.

Note: A separate controller is required to operate EvapoClean and this is available in 2 configurations.

Other EvapoClean devices are available for the purification of other volumes of acid.

Please contact us for advice on choosing the right product for your application.

Model
  • EvapoClean
Product Type
  • System
Volume
  • 25ml
Sample Capacity
  • 12
Related Products